张新晨，工学博士，南京工业大学副教授，江苏省“双创博士”。主要从事工程结构服役安全评估与综合性能提升方面的研究与教学工作，包括工程结构多灾安全与韧性、绿色低碳与复合材料结构、基础设施智能运维及防减灾等。现主持江苏省教育厅面上项目（A类）、江苏省“双创博士”计划项目、南京市留学人员科技创新项目择优资助计划等；先后参与新加坡建筑发展署科研项目、陆路交通管理局“未来城市”项目、巴拿马第四运河防撞专题等国际科研项目。在Journal of Structural engineering - ASCE、Engineering Structures、Automation in Construction、中国公路学报等领域权威期刊发表论文20余篇，其中第一/通讯作者SCI/EI论文10篇，担任Materials（IF=3.4）客座编辑。

受教育经历

2009/09-2013/07，哈尔滨工业大学，土木工程，工学学士

2013/09-2016/07，哈尔滨工业大学，土木工程，工学硕士

2016/08-2021/05，新加坡南洋理工大学，土木工程，工学博士

研究工作经历

2021/06-2022/05，新加坡国立大学，环境设计系，研究员

2022/01-至今，南京工业大学，土木工程学院，副教授

主持科研项目

【1】江苏省高等学校基础科学（自然科学）研究面上项目（A类），锈蚀环境钢筋混凝土桥墩船撞安全性评估与响应预测，2022-2024，主持

【2】南京市留学人员科技创新项目择优资助计划，基于LiDAR的路面沉降智能检测，2022-2023，主持

【3】江苏省“双创”博士计划项目，2023-2024，主持

代表性论文著作

1. Jiang, L., Wang, K., Fang, H., Chen, B., Zhu, L., Zhang, Q., &Zhang, X.*(2024). Protection performance of a novel anti-collision guardrail with recycled foamed concrete under vehicle collision.Engineering Structures, 305:117795

2.Zhang, X., & Li, B. (2024). Investigation on effect of ECC coverage condition on seismic behavior of beam-column joint.Structures, 62, 106195

3.Zhang, X., Kho, W., & Li, B. (2023). Prediction of behavior of UHPC beams based on truss models.Structures, 53, 642-651.

4.Zhang, X., & Li, B. (2022).Seismic Performance of Interior Reinforced Concrete Beam-Column Joint with Corroded Reinforcement.ASCEJournal of Structural Engineering，148(2), 04021275

5.Zhang, X.,& Li, B. (2021). Seismic Performance of Exterior Reinforced Concrete Beam-Column Joint with Corroded Reinforcement.Engineering Structures, 228, 111556

6.Zhang, X., & Li, B. (2020). Damage characteristics and assessment of corroded RC beam-column joint under cyclic loading based on acoustic emission monitoring.Engineering Structures,205, 110090.

7.Zhang, X., & Li, B. (2020). Seismic Performance of Reinforced Concrete Beam-Column Joints Constructed with Engineered Cementitious Composites.ASCEJournal of Structural Engineering,146(12), 04020271.

8.Zhang, X., Shan, W., Zhang, Z., & Li, B. (2018). AE monitoring of reinforced concrete squat wall subjected to cyclic loading with information entropy-based analysis.Engineering Structures,165, 359-367.

9.Zhang, X., & Li, B. (2018). Shear-strength capacity assessment of corroded reinforced concrete beam-column joints.ASCEJournal of Performance of Constructed Facilities,32(5), 04018067.

10. He, Z., Fang, H.,Zhang. X., & Shen, C. (2024). Lateral behavior of wood frame shear wall using PVC wood-plastic composite (WPC) veneer panels.Journal of Building Engineering, 109367

11.Chen, W., Fang, H., Zhu L.,Zhang, X.,& Zhu, J. (2024). Bending energy absorption performance of composite fender piles with different winding angles.Reviews on Advanced Materials Science, 63:20240004

12.Zhou, S., Fang, H.,Zhang, X., Zhu, L., & Wang, S. (2024). Ship collision performance of a flexible anti-collision device designed with fiber-reinforced rubber composites.Engineering Structures, 302:117472

13. Yan, H., Jia, E., Fang, H., Zhu, L.,Zhang, X., & Dai, Z. (2023). Impact dynamics analyses on an innovative fiber reinforced rubber composite bumper system for bridge protection.Thin-Walled Structures, 111331.

14.Yan, H., Fang, H., Zhu, L., Jia, E., Dai, Z., &Zhang, X.(2023). Evaluation of a novel steel box-soft body combination for bridge protection against ship collision.Reviews on Advanced Materials Science, 62(1):20220295.

15.Yang, L., Fang, H., Xie, H.,Zhang, X., & Hui, D. (2023). Compressive behaviour of multi-cell GFRP pultruded square columns reinforced with lattice-webs.Thin-Walled Structures, 184, 110445

16. Wang, Q., Li, J., Tang, X.,Zhang, X.(2022). How data quality affects model quality in scan-to-BIM: A case study of MEP scenes.Automation in Construction, 144, 104598.

17. Chen, C., Fang, H., Zhu, L., Han, J., Li, X., Qian, Z., &Zhang, X.(2022). Low-velocity impact properties of foam-filled composite lattice sandwich beams: Experimental study and numerical simulation.Composite Structures, 116573.

18.Zhang, Q., Fang, H., Zhu, L., Han, J.,Zhang, X., Li, X., & Chen, B. (2022). Impact behavior of corrugated-core infilling foam sandwich composite structure.Case Studies in Construction Materials,17, e01418.

19.Yao, P., Fang, H., Zhu, L., Zhu, J., Han, J., Wan, Y., &Zhang, X.(2022).Experimental study on the behavior of precast segmental piers under ship impact loading.Ocean Engineering,253, 111324.

20.Yang, Z.,Zhang, X., & Li, B. (2022). Residual Punching Shear Capacity of Corroded Reinforced Concrete Slabs.Magazine of Concrete Research, 1-48.

奖励与荣誉

【1】张新晨（6/10），中国航海学会科技进步二等奖，中国航海学会，2023

【2】张新晨（4/8），“科创江苏”创新创业大赛二等奖，江苏省科协等，2023

【3】张新晨（1/11），两岸青年复合材料创新创业大赛三等奖，江苏省复合材料学会，2023

【4】张新晨，刘恢先地震工程奖，黑龙江恢先地震工程学基金会，2020

主要研究方向

【1】工程结构多灾安全与韧性

【2】绿色低碳与复合材料结构

【3】基础设施智能运维及防减灾

联系方式

Email: xc.zhang@njtech.edu.cn